Which Error Code

GE Appliances oven code Loc Door

Meaning: The display flashes LOC DOOR even though the self-clean cycle was not selected. GE publishes a separate reset for this, different from the Unlock Door message that follows an actual self-clean cycle.

Checks the manufacturer publishes

When to call a technician

GE says the control should be reset after those steps and service should not be needed. If LOC DOOR remains, schedule service.

Frequently asked questions

What does GE Appliances oven code Loc Door mean?

The display flashes LOC DOOR even though the self-clean cycle was not selected. GE publishes a separate reset for this, different from the Unlock Door message that follows an actual self-clean cycle.

What can I check on a GE Appliances oven showing Loc Door?

First check that the self-clean cycle was not started and that a Control Lockout feature in the owner's manual is not the cause. Motorized switch ovens: with the door open, find the door jamb switch (a small black post or dowel) on the oven's face. Push it in until the oven cavity light goes off, as if the door were closed. While holding it in, press Self Clean and wait 10 seconds, then press Clear/Off or Cancel as soon as the Self Clean cycle starts. Wait 10 seconds for the display to clear. Manual switch ovens: press Self Clean, close the oven door, slide the latch to lock the door, then press Clear/Off or Cancel immediately. Unlock the door afterward. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.

When should I call a technician for Loc Door?

GE says the control should be reset after those steps and service should not be needed. If LOC DOOR remains, schedule service.

Sources

Retrieved 18 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with GE Appliances.

All GE Appliances oven codes · GE Appliances · Oven brands · Safety notes · All error codes