GE Appliances washer code IE
Meaning: Water is not entering the washer. On some models the Wash and Rinse lights blink instead of a code.
The same manufacturer page also lists H2O SUPPLY.
Checks the manufacturer publishes
- Check the house water supply. GE asks whether one or both valves were left off after installation or a vacation.
- When the message starts, the washer locks the controls for 4 minutes. GE says unplugging the washer restarts that 4 minute timer.
When to call a technician
After 4 minutes, start the cycle again. If the supply valves are open and the message returns, contact service.
Frequently asked questions
What does GE Appliances washer code IE mean?
Water is not entering the washer. On some models the Wash and Rinse lights blink instead of a code.
What can I check on a GE Appliances washer showing IE?
Check the house water supply. GE asks whether one or both valves were left off after installation or a vacation. When the message starts, the washer locks the controls for 4 minutes. GE says unplugging the washer restarts that 4 minute timer. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for IE?
After 4 minutes, start the cycle again. If the supply valves are open and the message returns, contact service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with GE Appliances.
More GE Appliances washer codes
All GE Appliances washer codes · GE Appliances · Washer brands · Safety notes · All error codes