LG dishwasher code OE
Meaning: The tub is not fully drained. LG calls this a water outlet error.
Checks the manufacturer publishes
- Clean the filter. LG says about once every one or two weeks. Wait 30 minutes after a cycle so the tub is not hot.
- Remove the lower rack, turn the filter handle counterclockwise, separate the inner filter and the stainless filter, wash both, and turn the handle clockwise until it clicks.
- Close the shutoff before you move the drain hose, then straighten any kink. LG says the end of the drain hose should be at least 30 cm above the floor.
When to call a technician
Standing water below the filter is normal, LG says, because it traps sewer smells. If water stays above the filter, request service.
Frequently asked questions
What does LG dishwasher code OE mean?
The tub is not fully drained. LG calls this a water outlet error.
What can I check on a LG dishwasher showing OE?
Clean the filter. LG says about once every one or two weeks. Wait 30 minutes after a cycle so the tub is not hot. Remove the lower rack, turn the filter handle counterclockwise, separate the inner filter and the stainless filter, wash both, and turn the handle clockwise until it clicks. Close the shutoff before you move the drain hose, then straighten any kink. LG says the end of the drain hose should be at least 30 cm above the floor. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for OE?
Standing water below the filter is normal, LG says, because it traps sewer smells. If water stays above the filter, request service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with LG.
More LG dishwasher codes
- IE: Water is not supplied to the tub. LG calls this a water inlet error.
- AE: LG groups FE, AE, and RE as too much water, a leak, oversudsing from dishwashing liquid, a unit that is not level, a door that is not aligned, or water poured into the Heat Dry blower.
- bE: Bubble error. LG says oversudsing from dish soap or too much detergent can cause it, and the code is there to help prevent leaks.
- HE: The heater that heats the wash water is not working.
All LG dishwasher codes · LG · Dishwasher brands · Safety notes · All error codes