Samsung oven code C-F0
Meaning: A communication error between parts of the range electronics.
Checks the manufacturer publishes
- Reset power so the code clears for the moment.
- On induction models NSI6D*9100, NSI6D*9300, and NSI6D*9500, Samsung publishes a SmartThings software update. The firmware should be DE92-04769A_24052400 or later. The display shows an upgrading message and then restarts.
When to call a technician
If your model cannot update, or the code returns after the update, Samsung says to request service.
Frequently asked questions
What does Samsung oven code C-F0 mean?
A communication error between parts of the range electronics.
What can I check on a Samsung oven showing C-F0?
Reset power so the code clears for the moment. On induction models NSI6D*9100, NSI6D*9300, and NSI6D*9500, Samsung publishes a SmartThings software update. The firmware should be DE92-04769A_24052400 or later. The display shows an upgrading message and then restarts. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for C-F0?
If your model cannot update, or the code returns after the update, Samsung says to request service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with Samsung.
More Samsung oven codes
- C-24: The temperature sensor sees the oven temperature rising faster than normal. Samsung says this is generally a blocked vent on the back of the cooktop.
- door: The door is not closed.
- C-10: This can appear during a SmartThings self diagnosis. Samsung says it is not a defect when the oven was very cold or very hot at the start of that test, and the oven still heats normally.
- bAd LinE: The power connection is not plugged in properly.
All Samsung oven codes · Samsung · Oven brands · Safety notes · All error codes