Which Error Code

Bosch washer code E17

Meaning: The filters in the water connection or the AquaStop hose are blocked, or the water pressure is too low.

The same manufacturer page also lists F17, F29.

Checks the manufacturer publishes

When to call a technician

If pressure is too low, Bosch says to contact a plumber.

Frequently asked questions

What does Bosch washer code E17 mean?

The filters in the water connection or the AquaStop hose are blocked, or the water pressure is too low.

What can I check on a Bosch washer showing E17?

Turn the tap off, remove the hose from the tap, and clean the filters with a small brush. Bosch says the AquaStop device contains an electric valve, so do not immerse it in water. On a washer without AquaStop, remove the hose from the back, take the filter out with pliers, and clean it. A fully open tap should flow about 2.5 gallons (10 liters) a minute. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.

When should I call a technician for E17?

If pressure is too low, Bosch says to contact a plumber.

Sources

Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with Bosch.

More Bosch washer codes

All Bosch washer codes · Bosch · Washer brands · Safety notes · All error codes