Which Error Code

Bosch washer code E18

Meaning: The drainage hose is blocked or kinked. Bosch warns the water may be very hot.

The same manufacturer page also lists F18.

Checks the manufacturer publishes

When to call a technician

If E18 returns after the hose and the pump are clear, contact Bosch support.

Frequently asked questions

What does Bosch washer code E18 mean?

The drainage hose is blocked or kinked. Bosch warns the water may be very hot.

What can I check on a Bosch washer showing E18?

Set the program to Off and pull the plug. Check the drain hose for kinks. Clean the hose and the siphon connection, then run Drain. Clean the pump only by the steps in the owner's manual. Bosch says to drain water slowly through the pump cover and to confirm the impeller can turn. Pour about 1 quart of water into the dispenser and run Drain to check for leaks. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.

When should I call a technician for E18?

If E18 returns after the hose and the pump are clear, contact Bosch support.

Sources

Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with Bosch.

More Bosch washer codes

All Bosch washer codes · Bosch · Washer brands · Safety notes · All error codes