Maytag washer code LF
Meaning: The washer is taking too long to fill.
The same manufacturer page also lists Lo FL, F8 E1.
Checks the manufacturer publishes
- Turn the water on. Open both the hot and cold faucets fully. Maytag says both hot and cold must be supplied.
- Maytag points to its F8 E1 article for clearing the code.
When to call a technician
If the faucets are open and LF remains, contact Maytag service.
Frequently asked questions
What does Maytag washer code LF mean?
The washer is taking too long to fill.
What can I check on a Maytag washer showing LF?
Turn the water on. Open both the hot and cold faucets fully. Maytag says both hot and cold must be supplied. Maytag points to its F8 E1 article for clearing the code. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for LF?
If the faucets are open and LF remains, contact Maytag service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with Maytag.
More Maytag washer codes
- Sud: There are excessive suds in the washer.
- Ofb: The load is out of balance. The washer may be running a balance routine.
- lid: The lid was left open.
- HC: The hot and cold inlet hoses are reversed. Maytag says the code appears at the end of the cycle.
All Maytag washer codes · Maytag · Washer brands · Safety notes · All error codes