Which Error Code

Whirlpool washer code F9 E1

Meaning: Long drain. The washer is taking too long to drain. On some top load displays the same alert is drn.

The same manufacturer page also lists drn.

Checks the manufacturer publishes

When to call a technician

If F9 E1 or drn remains, Whirlpool says to schedule service.

Frequently asked questions

What does Whirlpool washer code F9 E1 mean?

Long drain. The washer is taking too long to drain. On some top load displays the same alert is drn.

What can I check on a Whirlpool washer showing F9 E1?

The drain hose should not extend more than 4.5 inches into the standpipe or laundry tub. Whirlpool says water can siphon back if it goes farther. Use the U shaped hose form from the installation instructions. Do not tape the drain hose into the pipe. There must be an air gap. On the front load page, the maximum drain height is 96 inches from the bottom of the washer. The top load drn page says the hose end should be higher than 36 inches from the floor. Clean the drain pump filter on models that have one, and clean the small drain holes in the door seal. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.

When should I call a technician for F9 E1?

If F9 E1 or drn remains, Whirlpool says to schedule service.

Sources

Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with Whirlpool.

More Whirlpool washer codes

All Whirlpool washer codes · Whirlpool · Washer brands · Safety notes · All error codes