GE Appliances dishwasher code C4
Meaning: The machine filled twice after a power failure. GE lists a stuck or failed float switch, or a clogged drain or sump.
Checks the manufacturer publishes
- Touch Start and then Cancel/Reset.
- Tap the float cover, the plastic cover like an upside down cup at the front left of the floor.
- Check the sump at the back bottom of the tub for debris. GE says it looks like an upside down silverware basket.
When to call a technician
If the problem persists, contact service.
Frequently asked questions
What does GE Appliances dishwasher code C4 mean?
The machine filled twice after a power failure. GE lists a stuck or failed float switch, or a clogged drain or sump.
What can I check on a GE Appliances dishwasher showing C4?
Touch Start and then Cancel/Reset. Tap the float cover, the plastic cover like an upside down cup at the front left of the floor. Check the sump at the back bottom of the tub for debris. GE says it looks like an upside down silverware basket. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for C4?
If the problem persists, contact service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with GE Appliances.
More GE Appliances dishwasher codes
- C1: The pump out during drain has exceeded 2 minutes.
- C6: Water temperature is too low.
- FTD: Failure to drain.
- LEAK DETECTED: A possible leak. On models with leak detection the cycle is cancelled. 999 is a possible leak on models with Floor Protect, and on other models GE says it means the control needs a reset.
All GE Appliances dishwasher codes · GE Appliances · Dishwasher brands · Safety notes · All error codes