GE Appliances dishwasher code C6
Meaning: Water temperature is too low.
Checks the manufacturer publishes
- GE says water entering the dishwasher should be at least 120 degrees F. Run the nearby faucet before you start, to purge cold water from the line.
- Adjust the water heater. Avoid running the washing machine or a shower at the same time.
When to call a technician
If the supply is hot enough and C6 remains, contact service.
Frequently asked questions
What does GE Appliances dishwasher code C6 mean?
Water temperature is too low.
What can I check on a GE Appliances dishwasher showing C6?
GE says water entering the dishwasher should be at least 120 degrees F. Run the nearby faucet before you start, to purge cold water from the line. Adjust the water heater. Avoid running the washing machine or a shower at the same time. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for C6?
If the supply is hot enough and C6 remains, contact service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with GE Appliances.
More GE Appliances dishwasher codes
- C1: The pump out during drain has exceeded 2 minutes.
- C4: The machine filled twice after a power failure. GE lists a stuck or failed float switch, or a clogged drain or sump.
- FTD: Failure to drain.
- LEAK DETECTED: A possible leak. On models with leak detection the cycle is cancelled. 999 is a possible leak on models with Floor Protect, and on other models GE says it means the control needs a reset.
All GE Appliances dishwasher codes · GE Appliances · Dishwasher brands · Safety notes · All error codes