GE Appliances dishwasher code LEAK DETECTED
Meaning: A possible leak. On models with leak detection the cycle is cancelled. 999 is a possible leak on models with Floor Protect, and on other models GE says it means the control needs a reset.
The same manufacturer page also lists 999.
Checks the manufacturer publishes
- If the display says LEAK DETECTED, GE says to contact service.
- For 999 on a Floor Protect model, GE says the dishwasher will not start and to contact service. On other models, reset the control as the manual describes.
When to call a technician
Do not keep running a dishwasher that reports a leak.
Frequently asked questions
What does GE Appliances dishwasher code LEAK DETECTED mean?
A possible leak. On models with leak detection the cycle is cancelled. 999 is a possible leak on models with Floor Protect, and on other models GE says it means the control needs a reset.
What can I check on a GE Appliances dishwasher showing LEAK DETECTED?
If the display says LEAK DETECTED, GE says to contact service. For 999 on a Floor Protect model, GE says the dishwasher will not start and to contact service. On other models, reset the control as the manual describes. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for LEAK DETECTED?
Do not keep running a dishwasher that reports a leak.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with GE Appliances.
More GE Appliances dishwasher codes
- C1: The pump out during drain has exceeded 2 minutes.
- C4: The machine filled twice after a power failure. GE lists a stuck or failed float switch, or a clogged drain or sump.
- C6: Water temperature is too low.
- FTD: Failure to drain.
All GE Appliances dishwasher codes · GE Appliances · Dishwasher brands · Safety notes · All error codes