LG dryer code d80
Meaning: Airflow is restricted between the dryer and the outside exhaust.
The same manufacturer page also lists d90, d95.
Checks the manufacturer publishes
- Remove lint from the lint tray between loads. Wash the tray with warm water and a soft brush and let it dry before you put it back.
- Use a smaller load.
- Behind the dryer, confirm the exhaust hose is not crushed, kinked, coiled, torn, or loose.
- Outside, confirm the flapper opens fully and clear visible lint. LG says an Air Dry cycle should open the flapper.
When to call a technician
If those steps fail, LG says to hire a dryer duct cleaner for the vent inside the walls. Give them the duct length and the number of 90 degree turns.
Frequently asked questions
What does LG dryer code d80 mean?
Airflow is restricted between the dryer and the outside exhaust.
What can I check on a LG dryer showing d80?
Remove lint from the lint tray between loads. Wash the tray with warm water and a soft brush and let it dry before you put it back. Use a smaller load. Behind the dryer, confirm the exhaust hose is not crushed, kinked, coiled, torn, or loose. Outside, confirm the flapper opens fully and clear visible lint. LG says an Air Dry cycle should open the flapper. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for d80?
If those steps fail, LG says to hire a dryer duct cleaner for the vent inside the walls. Give them the duct length and the number of 90 degree turns.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with LG.
More LG dryer codes
- tE1: A problem was detected with the thermistor.
- dE: The door is not completely closed.
- gAS: The dryer is not receiving gas.
- nP: No current is detected at the heater. LG says this normally indicates a problem with the home wiring.
- drn: On a dryer, LG uses drn or OE when the water container is full, the drain hose is kinked, or the drain pump is air locked. This is not the washer OE code.
All LG dryer codes · LG · Dryer brands · Safety notes · All error codes