LG dryer code drn
Meaning: On a dryer, LG uses drn or OE when the water container is full, the drain hose is kinked, or the drain pump is air locked. This is not the washer OE code.
The same manufacturer page also lists OE.
Checks the manufacturer publishes
- Empty the water container and push it in until it clicks.
- Straighten the drain hose. LG says the top of the hose should be no more than 1 meter above the floor, and the end should not sit under water.
- To clear residual water, LG says to run Air Dry for 2 to 3 minutes and then power off. Some models also have a drain hose cap. Close that cap firmly.
When to call a technician
If the container is empty and the hose is clear but the code returns, or the dryer stops again after 10 to 20 minutes, LG says to request service.
Frequently asked questions
What does LG dryer code drn mean?
On a dryer, LG uses drn or OE when the water container is full, the drain hose is kinked, or the drain pump is air locked. This is not the washer OE code.
What can I check on a LG dryer showing drn?
Empty the water container and push it in until it clicks. Straighten the drain hose. LG says the top of the hose should be no more than 1 meter above the floor, and the end should not sit under water. To clear residual water, LG says to run Air Dry for 2 to 3 minutes and then power off. Some models also have a drain hose cap. Close that cap firmly. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for drn?
If the container is empty and the hose is clear but the code returns, or the dryer stops again after 10 to 20 minutes, LG says to request service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with LG.
More LG dryer codes
- tE1: A problem was detected with the thermistor.
- d80: Airflow is restricted between the dryer and the outside exhaust.
- dE: The door is not completely closed.
- gAS: The dryer is not receiving gas.
- nP: No current is detected at the heater. LG says this normally indicates a problem with the home wiring.
All LG dryer codes · LG · Dryer brands · Safety notes · All error codes