LG dryer code tE1
Meaning: A problem was detected with the thermistor.
The same manufacturer page also lists tE2, tE3, tE4, tE5, tE6.
Checks the manufacturer publishes
- Unplug the dryer or trip the breaker. Hold Start/Pause for 5 seconds while power is off. Restore power and run another cycle.
- LG also describes a separate tE2 during steam cycles in cold conditions. For that case, clean the lint tray and check the outside exhaust flappers.
When to call a technician
If tE returns after the reset, LG says the dryer may need repair.
Frequently asked questions
What does LG dryer code tE1 mean?
A problem was detected with the thermistor.
What can I check on a LG dryer showing tE1?
Unplug the dryer or trip the breaker. Hold Start/Pause for 5 seconds while power is off. Restore power and run another cycle. LG also describes a separate tE2 during steam cycles in cold conditions. For that case, clean the lint tray and check the outside exhaust flappers. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for tE1?
If tE returns after the reset, LG says the dryer may need repair.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with LG.
More LG dryer codes
- d80: Airflow is restricted between the dryer and the outside exhaust.
- dE: The door is not completely closed.
- gAS: The dryer is not receiving gas.
- nP: No current is detected at the heater. LG says this normally indicates a problem with the home wiring.
- drn: On a dryer, LG uses drn or OE when the water container is full, the drain hose is kinked, or the drain pump is air locked. This is not the washer OE code.
All LG dryer codes · LG · Dryer brands · Safety notes · All error codes