LG washer code FE
Meaning: Water overfill. LG says the drain pump runs to help prevent leaks, and extra water may be entering through the detergent dispenser.
The same manufacturer page also lists E04, E12.
Checks the manufacturer publishes
- Check whether extra water is coming in through the dispenser.
- Unplug the washer, wait 60 seconds, and restart.
- Start a Quick 30 program. LG says it should start with a drain. If it does not, stop the program and turn the washer off.
When to call a technician
If FE remains, LG says the washer needs inspection.
Frequently asked questions
What does LG washer code FE mean?
Water overfill. LG says the drain pump runs to help prevent leaks, and extra water may be entering through the detergent dispenser.
What can I check on a LG washer showing FE?
Check whether extra water is coming in through the dispenser. Unplug the washer, wait 60 seconds, and restart. Start a Quick 30 program. LG says it should start with a drain. If it does not, stop the program and turn the washer off. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for FE?
If FE remains, LG says the washer needs inspection.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with LG.
More LG washer codes
- OE: The washer cannot drain. LG says a kinked drain hose or a clogged drain pump filter can cause it.
- IE: The tub does not fill in the time LG allows. The faucet may be off, the hose kinked or frozen, or the hose not connected.
- UE: The load is piled on one side, or it is too large or too small, so the drum cannot balance.
- dE: The door did not lock. dE or dE1 means the door is not closed properly. dE2 means the door is closed but not locked.
- LE: The tub does not spin. LG says the motor cannot run because the washer is overloaded or a foreign object is stuck.
- Sud: Too many suds. The washer adds a suds reducing cycle, which LG says can add about 2 hours. If suds are detected during spin, it stops to help prevent leaking.
All LG washer codes · LG · Washer brands · Safety notes · All error codes