LG washer code OE
Meaning: The washer cannot drain. LG says a kinked drain hose or a clogged drain pump filter can cause it.
The same manufacturer page also lists E03, E21.
Checks the manufacturer publishes
- Check behind the washer and straighten or clear the drain hose, then run a spin cycle.
- If the hose is straight, run a spin only cycle and listen for the drain pump. LG's spin only steps are: power on, press Spin Speed until High, then Start.
- If you hear the pump, clean the drain pump filter. LG says to keep the drain tube cap tight so it does not leak, and to run Tub Clean if suds were the cause. Use less detergent after that.
When to call a technician
If OE returns, LG says the washer may need repair.
Frequently asked questions
What does LG washer code OE mean?
The washer cannot drain. LG says a kinked drain hose or a clogged drain pump filter can cause it.
What can I check on a LG washer showing OE?
Check behind the washer and straighten or clear the drain hose, then run a spin cycle. If the hose is straight, run a spin only cycle and listen for the drain pump. LG's spin only steps are: power on, press Spin Speed until High, then Start. If you hear the pump, clean the drain pump filter. LG says to keep the drain tube cap tight so it does not leak, and to run Tub Clean if suds were the cause. Use less detergent after that. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for OE?
If OE returns, LG says the washer may need repair.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with LG.
More LG washer codes
- IE: The tub does not fill in the time LG allows. The faucet may be off, the hose kinked or frozen, or the hose not connected.
- UE: The load is piled on one side, or it is too large or too small, so the drum cannot balance.
- dE: The door did not lock. dE or dE1 means the door is not closed properly. dE2 means the door is closed but not locked.
- LE: The tub does not spin. LG says the motor cannot run because the washer is overloaded or a foreign object is stuck.
- Sud: Too many suds. The washer adds a suds reducing cycle, which LG says can add about 2 hours. If suds are detected during spin, it stops to help prevent leaking.
- FE: Water overfill. LG says the drain pump runs to help prevent leaks, and extra water may be entering through the detergent dispenser.
All LG washer codes · LG · Washer brands · Safety notes · All error codes