LG washer code IE
Meaning: The tub does not fill in the time LG allows. The faucet may be off, the hose kinked or frozen, or the hose not connected.
The same manufacturer page also lists E02, E10.
Checks the manufacturer publishes
- Confirm the supply hose is connected and the faucet is open.
- Straighten the hose. If it is badly bent, turn the faucet off before you disconnect it.
- In cold weather, thaw a frozen faucet or hose with warm water. LG says 50 degrees C or lower for the hose, not boiling water.
- Turn the faucet off, remove the inlet filter, clear rust or sand, and put the filter back before reconnecting.
When to call a technician
If those checks fail, LG says the water supply valve may need service.
Frequently asked questions
What does LG washer code IE mean?
The tub does not fill in the time LG allows. The faucet may be off, the hose kinked or frozen, or the hose not connected.
What can I check on a LG washer showing IE?
Confirm the supply hose is connected and the faucet is open. Straighten the hose. If it is badly bent, turn the faucet off before you disconnect it. In cold weather, thaw a frozen faucet or hose with warm water. LG says 50 degrees C or lower for the hose, not boiling water. Turn the faucet off, remove the inlet filter, clear rust or sand, and put the filter back before reconnecting. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for IE?
If those checks fail, LG says the water supply valve may need service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with LG.
More LG washer codes
- OE: The washer cannot drain. LG says a kinked drain hose or a clogged drain pump filter can cause it.
- UE: The load is piled on one side, or it is too large or too small, so the drum cannot balance.
- dE: The door did not lock. dE or dE1 means the door is not closed properly. dE2 means the door is closed but not locked.
- LE: The tub does not spin. LG says the motor cannot run because the washer is overloaded or a foreign object is stuck.
- Sud: Too many suds. The washer adds a suds reducing cycle, which LG says can add about 2 hours. If suds are detected during spin, it stops to help prevent leaking.
- FE: Water overfill. LG says the drain pump runs to help prevent leaks, and extra water may be entering through the detergent dispenser.
All LG washer codes · LG · Washer brands · Safety notes · All error codes