LG washer code tE
Meaning: A heating error, which LG says is usually a faulty thermistor.
Checks the manufacturer publishes
- Unplug the washer for 10 seconds, plug it back in, and set spin speed to no spin so it can drain, then restart the wash.
When to call a technician
If tE remains, close the water taps, unplug the washer, and request service.
Frequently asked questions
What does LG washer code tE mean?
A heating error, which LG says is usually a faulty thermistor.
What can I check on a LG washer showing tE?
Unplug the washer for 10 seconds, plug it back in, and set spin speed to no spin so it can drain, then restart the wash. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for tE?
If tE remains, close the water taps, unplug the washer, and request service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with LG.
More LG washer codes
- OE: The washer cannot drain. LG says a kinked drain hose or a clogged drain pump filter can cause it.
- IE: The tub does not fill in the time LG allows. The faucet may be off, the hose kinked or frozen, or the hose not connected.
- UE: The load is piled on one side, or it is too large or too small, so the drum cannot balance.
- dE: The door did not lock. dE or dE1 means the door is not closed properly. dE2 means the door is closed but not locked.
- LE: The tub does not spin. LG says the motor cannot run because the washer is overloaded or a foreign object is stuck.
- Sud: Too many suds. The washer adds a suds reducing cycle, which LG says can add about 2 hours. If suds are detected during spin, it stops to help prevent leaking.
All LG washer codes · LG · Washer brands · Safety notes · All error codes