Samsung dryer code Clg
Meaning: These codes appear only after a Vent Blockage test. Clg or Cg means the vent is clogged. C80 or C8 means about 80 percent is clogged. C90 or C9 means over 90 percent is clogged.
The same manufacturer page also lists Cg, C80, C8, C90, C9.
Checks the manufacturer publishes
- Clean the lint filter and the exhaust vent.
When to call a technician
If the test still reports a blocked vent after cleaning, have the vent run checked. Do not keep drying with a blocked exhaust.
Frequently asked questions
What does Samsung dryer code Clg mean?
These codes appear only after a Vent Blockage test. Clg or Cg means the vent is clogged. C80 or C8 means about 80 percent is clogged. C90 or C9 means over 90 percent is clogged.
What can I check on a Samsung dryer showing Clg?
Clean the lint filter and the exhaust vent. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for Clg?
If the test still reports a blocked vent after cleaning, have the vent run checked. Do not keep drying with a blocked exhaust.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with Samsung.
More Samsung dryer codes
- tE: The dryer has a temperature problem, or a problem with the sensor that measures temperature.
- HC: The dryer is getting too hot. Samsung also says some cases are the heater not getting hot enough, which on an electric dryer can be low voltage.
- HC2: Samsung lists HC2 as a gas ignition error. It is in the group with no separate troubleshooting steps.
- dE: The door, the latch, or the sensor that checks them is not secured.
- 3C: Samsung lists 3C as a motor error, in the group without a separate repair procedure.
All Samsung dryer codes · Samsung · Dryer brands · Safety notes · All error codes