Samsung dryer code tE
Meaning: The dryer has a temperature problem, or a problem with the sensor that measures temperature.
The same manufacturer page also lists tS, t5, tC, tO, t0, tE3, tC5, tCS, 1 tC.
Checks the manufacturer publishes
- Clean the lint screen and the exhaust vent. Samsung says a clogged lint screen or vent trapping heat is the most common cause.
When to call a technician
If the code continues after the lint screen and the exhaust vent are clean, Samsung says to request service.
Frequently asked questions
What does Samsung dryer code tE mean?
The dryer has a temperature problem, or a problem with the sensor that measures temperature.
What can I check on a Samsung dryer showing tE?
Clean the lint screen and the exhaust vent. Samsung says a clogged lint screen or vent trapping heat is the most common cause. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for tE?
If the code continues after the lint screen and the exhaust vent are clean, Samsung says to request service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with Samsung.
More Samsung dryer codes
- HC: The dryer is getting too hot. Samsung also says some cases are the heater not getting hot enough, which on an electric dryer can be low voltage.
- HC2: Samsung lists HC2 as a gas ignition error. It is in the group with no separate troubleshooting steps.
- dE: The door, the latch, or the sensor that checks them is not secured.
- Clg: These codes appear only after a Vent Blockage test. Clg or Cg means the vent is clogged. C80 or C8 means about 80 percent is clogged. C90 or C9 means over 90 percent is clogged.
- 3C: Samsung lists 3C as a motor error, in the group without a separate repair procedure.
All Samsung dryer codes · Samsung · Dryer brands · Safety notes · All error codes