Samsung dryer code HC2
Meaning: Samsung lists HC2 as a gas ignition error. It is in the group with no separate troubleshooting steps.
Checks the manufacturer publishes
- Power the dryer off for 2 to 3 minutes, power it back on, and restart the cycle.
- The published check stops there. Do not open the burner, the igniter, or the gas line.
When to call a technician
If the code returns, Samsung says to check the user manual and then request service.
Frequently asked questions
What does Samsung dryer code HC2 mean?
Samsung lists HC2 as a gas ignition error. It is in the group with no separate troubleshooting steps.
What can I check on a Samsung dryer showing HC2?
Power the dryer off for 2 to 3 minutes, power it back on, and restart the cycle. The published check stops there. Do not open the burner, the igniter, or the gas line. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for HC2?
If the code returns, Samsung says to check the user manual and then request service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with Samsung.
More Samsung dryer codes
- tE: The dryer has a temperature problem, or a problem with the sensor that measures temperature.
- HC: The dryer is getting too hot. Samsung also says some cases are the heater not getting hot enough, which on an electric dryer can be low voltage.
- dE: The door, the latch, or the sensor that checks them is not secured.
- Clg: These codes appear only after a Vent Blockage test. Clg or Cg means the vent is clogged. C80 or C8 means about 80 percent is clogged. C90 or C9 means over 90 percent is clogged.
- 3C: Samsung lists 3C as a motor error, in the group without a separate repair procedure.
All Samsung dryer codes · Samsung · Dryer brands · Safety notes · All error codes