Samsung dryer code dE
Meaning: The door, the latch, or the sensor that checks them is not secured.
The same manufacturer page also lists dC, dF, do, d0, 1 DC, 1 dF.
Checks the manufacturer publishes
- Check that the latch is fixed, that laundry is not caught in the door, and that the door is closed.
When to call a technician
If the code cannot be cleared, or the door or latch is damaged, Samsung says to request service.
Frequently asked questions
What does Samsung dryer code dE mean?
The door, the latch, or the sensor that checks them is not secured.
What can I check on a Samsung dryer showing dE?
Check that the latch is fixed, that laundry is not caught in the door, and that the door is closed. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for dE?
If the code cannot be cleared, or the door or latch is damaged, Samsung says to request service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with Samsung.
More Samsung dryer codes
- tE: The dryer has a temperature problem, or a problem with the sensor that measures temperature.
- HC: The dryer is getting too hot. Samsung also says some cases are the heater not getting hot enough, which on an electric dryer can be low voltage.
- HC2: Samsung lists HC2 as a gas ignition error. It is in the group with no separate troubleshooting steps.
- Clg: These codes appear only after a Vent Blockage test. Clg or Cg means the vent is clogged. C80 or C8 means about 80 percent is clogged. C90 or C9 means over 90 percent is clogged.
- 3C: Samsung lists 3C as a motor error, in the group without a separate repair procedure.
All Samsung dryer codes · Samsung · Dryer brands · Safety notes · All error codes