Samsung washer code 4C2
Meaning: The cold water supply is extremely hot, usually because the supply hoses are swapped.
The same manufacturer page also lists 4E2, CE, 14C2, nF1.
Checks the manufacturer publishes
- Connect the cold supply to the cold inlet and the hot supply to the hot inlet. Samsung says this is typically blue to blue and red to red.
When to call a technician
Samsung says this code does not mean the washer needs service.
Frequently asked questions
What does Samsung washer code 4C2 mean?
The cold water supply is extremely hot, usually because the supply hoses are swapped.
What can I check on a Samsung washer showing 4C2?
Connect the cold supply to the cold inlet and the hot supply to the hot inlet. Samsung says this is typically blue to blue and red to red. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for 4C2?
Samsung says this code does not mean the washer needs service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with Samsung.
More Samsung washer codes
- 4C: Water is not entering the washer correctly.
- 5E: Water is not draining at the correct speed, or it is not draining at all.
- UE: The load is unbalanced. A Ur code means the washer will add water and try to balance the load again. Samsung says Ur is not a fault.
- dE: The door is not detected as closed and locked.
- SUd: The washer detected too many suds. It pauses so the suds can settle, then continues. The code may flash again at the end as a reminder.
- 1E: Moisture is where it should not be, or the water level sensor has a problem.
All Samsung washer codes · Samsung · Washer brands · Safety notes · All error codes