Samsung washer code dE
Meaning: The door is not detected as closed and locked.
The same manufacturer page also lists dC, dE1, dE2, dS, d5, FL, LO, L0, dL, 1 dC.
On some models dC is a door code and on others it is an unbalanced load code. Samsung says to check the manual. A 1dC4 code on a FlexWash washer can mean the rubber button by the upper latch is missing. Samsung says replacing that button clears it and service is not required.
Checks the manufacturer publishes
- Check that the latch is fixed, that laundry is not caught in the door, and that the door is closed.
When to call a technician
If the code cannot be cleared, or the door or latch is damaged, Samsung says to request service.
Frequently asked questions
What does Samsung washer code dE mean?
The door is not detected as closed and locked. On some models dC is a door code and on others it is an unbalanced load code. Samsung says to check the manual. A 1dC4 code on a FlexWash washer can mean the rubber button by the upper latch is missing. Samsung says replacing that button clears it and service is not required.
What can I check on a Samsung washer showing dE?
Check that the latch is fixed, that laundry is not caught in the door, and that the door is closed. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for dE?
If the code cannot be cleared, or the door or latch is damaged, Samsung says to request service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with Samsung.
More Samsung washer codes
- 4C: Water is not entering the washer correctly.
- 4C2: The cold water supply is extremely hot, usually because the supply hoses are swapped.
- 5E: Water is not draining at the correct speed, or it is not draining at all.
- UE: The load is unbalanced. A Ur code means the washer will add water and try to balance the load again. Samsung says Ur is not a fault.
- SUd: The washer detected too many suds. It pauses so the suds can settle, then continues. The code may flash again at the end as a reminder.
- 1E: Moisture is where it should not be, or the water level sensor has a problem.
All Samsung washer codes · Samsung · Washer brands · Safety notes · All error codes