Samsung washer code 5E
Meaning: Water is not draining at the correct speed, or it is not draining at all.
The same manufacturer page also lists 5C, nd, SE, SC, 1 5C.
Checks the manufacturer publishes
- Let the water cool for about an hour if a hot cycle just ran. Samsung warns the water can still be very hot.
- Level the washer. Samsung says a washer that is not level may not drain correctly.
- Check the drain hose: 6 to 8 inches into the standpipe or sink, secured so it cannot slip farther, not airtight, not kinked, at least 18 inches high (24 inches for a wash basin), and not higher than 96 inches (35 inches for a wash basin). Samsung says not to use a drain hose extension kit, and not to remove the hose holder screw.
- On a front load washer, clean the pump filter. Samsung says top load washers do not have a removable pump filter. Use the user manual for the filter location on your model.
When to call a technician
Start a cycle. Samsung says the washer should drain at the beginning. If it does not, request service.
Frequently asked questions
What does Samsung washer code 5E mean?
Water is not draining at the correct speed, or it is not draining at all.
What can I check on a Samsung washer showing 5E?
Let the water cool for about an hour if a hot cycle just ran. Samsung warns the water can still be very hot. Level the washer. Samsung says a washer that is not level may not drain correctly. Check the drain hose: 6 to 8 inches into the standpipe or sink, secured so it cannot slip farther, not airtight, not kinked, at least 18 inches high (24 inches for a wash basin), and not higher than 96 inches (35 inches for a wash basin). Samsung says not to use a drain hose extension kit, and not to remove the hose holder screw. On a front load washer, clean the pump filter. Samsung says top load washers do not have a removable pump filter. Use the user manual for the filter location on your model. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for 5E?
Start a cycle. Samsung says the washer should drain at the beginning. If it does not, request service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with Samsung.
More Samsung washer codes
- 4C: Water is not entering the washer correctly.
- 4C2: The cold water supply is extremely hot, usually because the supply hoses are swapped.
- UE: The load is unbalanced. A Ur code means the washer will add water and try to balance the load again. Samsung says Ur is not a fault.
- dE: The door is not detected as closed and locked.
- SUd: The washer detected too many suds. It pauses so the suds can settle, then continues. The code may flash again at the end as a reminder.
- 1E: Moisture is where it should not be, or the water level sensor has a problem.
All Samsung washer codes · Samsung · Washer brands · Safety notes · All error codes