Samsung washer code tE
Meaning: Temperature sensor error. Samsung places this code in the group that has no separate troubleshooting steps.
The same manufacturer page also lists tE1, tC.
Checks the manufacturer publishes
- Power the washer off for 2 to 3 minutes, power it back on, and restart the cycle.
When to call a technician
If the code continues, Samsung says to request service.
Frequently asked questions
What does Samsung washer code tE mean?
Temperature sensor error. Samsung places this code in the group that has no separate troubleshooting steps.
What can I check on a Samsung washer showing tE?
Power the washer off for 2 to 3 minutes, power it back on, and restart the cycle. Unplug the appliance or switch off its breaker before you move it or open a panel. If it uses gas, shut the gas off before any step the manufacturer did not publish.
When should I call a technician for tE?
If the code continues, Samsung says to request service.
Sources
Retrieved 16 Nov 2026. Models differ. If your manual defines this code differently, the manual wins. Which Error Code is not affiliated with Samsung.
More Samsung washer codes
- 4C: Water is not entering the washer correctly.
- 4C2: The cold water supply is extremely hot, usually because the supply hoses are swapped.
- 5E: Water is not draining at the correct speed, or it is not draining at all.
- UE: The load is unbalanced. A Ur code means the washer will add water and try to balance the load again. Samsung says Ur is not a fault.
- dE: The door is not detected as closed and locked.
- SUd: The washer detected too many suds. It pauses so the suds can settle, then continues. The code may flash again at the end as a reminder.
All Samsung washer codes · Samsung · Washer brands · Safety notes · All error codes